XJTAG

Home > Support > Knowledge Base > By Topic

Knowledge Base - Browsing by Topic

XJTAG - GeneralXJEaseXJAnalyserXJRunnerInstallingLicensingNetlistsSpecific chipsJTAG - General

---

Do I have to change my XJEase file to make it work with XJRunner?

The short answer is 'No'. However, to use the full features of XJRunner you will need to add a 'TEST LIST' section. See this application note.

How to modify your XJEase project to work with XJRunner

You can run your XJEase tests in XJRunner without modification, as long as you have an XJEase licence in your XJLink. If the tests will be run with only an XJRunner licence, you must turn the XJEase tests into an XJPack file.

To use the full capabilities of XJRunner, you must also add a new section (TEST LIST) to the XJEase project file. This application note describes how to fully convert an XJEase project file for XJRunner.

• Knowledge Base
• XJEase Example Code
• XJEase Library
• Updates
• JTAG
• DFT Guidelines [PDF]
• Take a FREE evaluation

• What people are saying...

  "XJTAG has provided the basis for a common design for test strategy, spanning development, first article build, production and field service."
  
  Simon Holder, Hardware Design Manager, Thales UK
• Get the brochure
• Take the XJAnalyser tour