Configure your products
XJRunner
Run-time Manufacturing Test & Programming Environment
Execute tests
- Parallel testing with auxiliary controllers
- JTAG chain debugger
- Manage user permissions
- Layout viewer
- Schematic viewer
- Log files
- Fault dictionaries
XJAnalyser
Network Licensing
XJDeveloper
IDE for test & programming development & debug
Develop Test Projects
- Huge test library of JTAG and non-JTAG devices
- Powerful XJEase scripting
- Automated connection test
- Stuck-at faults
- Pull resistor faults
- Open circuit faults
- Test coverage reports
- Design rules checker
XJRunner
Run-time manufacturing test & programming environment
Execute Tests
- JTAG chain debugger
- Layout viewer
- Schematic viewer
- Log files
- Fault dictionaries
XJAnalyser
XJFlash
Network Licensing
XJDeveloper Plus
Extended IDE for test & programming development & debug
Develop Test Projects
- Huge test library of JTAG and non-JTAG devices
- Powerful XJEase scripting
- Automated connection test
- Stuck-at faults
- Pull resistor faults
- Open circuit faults
- Test coverage reports
- Design rules checker
XJRunner
Run-time manufacturing test & programming environment
Execute Tests
- JTAG chain debugger
- Layout viewer
- Schematic viewer
- Log files
- Fault dictionaries
XJAnalyser
Real-time graphical board debug
- Point-and-click pin control – no code required
- Waveform viewer
XJFlash
Industry-leading fast flash programmer
- Uses FPGA on target board
- 30MB/s+ programming speed
- SPI, MRAM and more
- Simple integration with test projects
Network Licensing
FTDI Support
Features
- No additional hardware required
- 1 JTAG Controllers
- 1 TAP
- Up to 12 GPIO on Pins
- Up to 30 MHz TCK Frequencies
- USB Connection
XJLink-PF Series
- Model
Hardware features
- ±30 V Voltage Protection
- 1 JTAG Controller
- USB Connection
- Up to 166 MHz TCK Frequencies
- Configurable Voltage
- Frequency Measurements
- Voltage Measurements
- Automatic Signal Skew Control
- — Button to Start Tests
- Visual Indication of Test Status
- Mounting Options Available
XJLink2 Series
- Model
Hardware features
- +5 V Voltage Protection
- Up to 166 MHz TCK Frequencies
- Configurable Voltage
- Frequency Measurements
- Voltage Measurements
- Automatic Signal Skew Control
Accessory – Additional I/O
XJIO Board + RS232 / UART
Expansion unit to improve the test coverage of your DUT. 208 I/O, RS232/UART, 8 A/D, 8 D/A, buttons, LEDs
XJIO Board without RS232
Expansion unit to improve the test coverage of your DUT. 208 I/O, 8 A/D, 8 D/A, buttons, LEDs.
XJComms
An add-on to the XJIO Boards offering a test solution for common automotive interface signals (CAN, RS-485/RS-422, FlexRay, LIN).
Accessory – Connection & Protection
XJXDP
Simply connect your XJTAG system to an Intel XDP debug header. Overcome the problems of interfacing to this low voltage, low impedance interface.
XJExtender, Controller+Target Pair
XJTAG’s recommended solution to overcome signal integrity issues when connecting a JTAG controller to a DUT up to 10 m away
XJExtender, Controller Unit
Additional Controller unit for use with XJExtender setups.
XJExtender, Target unit
Additional Target unit for use with XJExtender setups.
XJIsolator
XJIsolator provides galvanic isolation between a DUT and a JTAG controller. Can be easily mounted inside a test fixture.
Surge Protection Board
Surge Protection Board Provides safeguards against excessive inrush current, over-current and overvoltage for the Device Under Test (DUT).
ICT Relay Board
Allows both a test controller and another piece of test/programming equipment access to the TAP control signals on a DUT, while ensuring the DUT is fully isolated.
Accessory – XJAccelerator
XJAccelerator, SODIMM
A multipurpose FPGA module, in SODIMM form factor, to accelerate programming functions and extend test coverage as part of a test fixture.
XJAccelerator v2
Multipurpose unit that can be integrated with your XJTAG system to facilitate and accelerate programming functions as well as extending test coverage on a DUT.
XJAccelerator v2 Active Protector
Additional optional protection for the XJAccelerator v2 board against potentially damaging voltages.
Accessory – Adapters
0.1” to 1.27 mm Adaptor
20-way 0.1” connector to 20-way 1.27 mm connector.
Product code: XJTAG-XJA-0060
0.1” to 2 mm Adaptor
20-way 0.1” connector to 20-way 2 mm connector.
Product code: XJTAG-XJA-0050
2x 10-way 0.1” Adaptor
20-way 0.1” connector into 2 x 10-way 0.1” connectors.
Product code: XJTAG-XJA-0100
2x 10-way 2 mm Adaptor
20-way 0.1” connector into 2 x 10-way 0.1” connectors.
Product code: XJTAG-XJA-0010
Arm CoreSight 10 Adapter
20-way 0.1” connector to a standard Arm CoreSight 10 10-way 1.27mm connector.
Product code: XJTAG-XJA-0015
Arm CoreSight 20 Adapter
20-way 0.1” connector to a standard Arm CoreSight 20 20-way 1.27mm connector.
Product code: XJTAG-XJA-0016
USB-C Female to USB-A Male Adapter
Enables XJLink-PF series controllers to be used from a USB-A Host port.
Product code: MSC-0018
XJExpress Socket Adapter SOP8-5.4
When used with XJExpress, enables SPI NOR flash device programming before PCB assembly (supports up to SOP8-5.4mm Quad-SPI).
Product code: XJA-0007
Clock Buffer Adapter
Re-buffers SPI clock from XJLink-FE18 to boost drive strength, enabling strong termination and meeting flash clock input voltage requirements.
Product code: XJA-0002
Signal Breakout Board
Allows oscilloscope or test meter access to signals when connecting controller to DUT.
Product code: XJTAG-XJA-0080
Splitter, Signal Integrity Board, Right Angle
Splits signals from a 20-way 0.1” into two 20-way 0.1” right-angle connectors. ‘Hard grounds’ between active signals improve signal integrity.
Product code: XJTAG-XJA-0006
Splitter, Signal Integrity Board, Elbow
20-way 0.1” connector into 2 x 20-way 0.1” connectors. Improves signal integrity by putting a ‘hard ground’ connection between each active signal.
Product code: XJTAG-XJA-0030
Splitter, Signal Integrity Board, SFF
20-way 0.1” connector into 2 x 20-way 0.1” connectors. ‘Hard ground’ connections between active signals. Small Form Factor. Fits XJQuad.
Product code: XJTAG-XJA-0031
Splitter, Signal Integrity Board, PXI
20-way 0.1” connector into 2 x 20-way 0.1” connectors. Improves signal integrity by putting a ‘hard ground’ connection between each active signal.
Product code: XJTAG-XJA-0032
Splitter, Signal Integrity Board, Standard
20-way 0.1” connector into 2 x 20-way 0.1” connectors. Improves signal integrity by putting a ‘hard ground’ connection between each active signal.
Product code: XJTAG-XJA-0033
Termination & Protection Board
Provides series termination for increased speed, reliability and higher transient protection.
Product code: XJTAG-XJA-0021
AMD Xilinx Adapter
20-way 0.1” connector to a standard Xilinx 14-way 2 mm connector.
Product code: XJTAG-XJA-0040
Accessory – Other
XJLink-PF40 Mounting Kit
SKU: FXK-0001
XJLink-PF20 Mounting Kit
SKU: FXK-0002