Configure your products

XJRunner

Run-time Manufacturing Test & Programming Environment

Execute tests

Parallel testing with auxiliary controllers
JTAG chain debugger
Manage user permissions
Layout viewer
Schematic viewer
Log files
Fault dictionaries

Optional

XJAnalyser

Network Licensing

Quantity:

XJDeveloper

IDE for test & programming development & debug

Develop Test Projects

Huge test library of JTAG and non-JTAG devices
Powerful XJEase scripting
Automated connection test
Stuck-at faults
Pull resistor faults
Open circuit faults
Test coverage reports
Design rules checker

Included Module

XJRunner Run-time manufacturing test & programming environment

Execute Tests

JTAG chain debugger
Layout viewer
Schematic viewer
Log files
Fault dictionaries

Optional

XJAnalyser

XJFlash

Network Licensing

Quantity:

Best value

XJDeveloper Plus

Extended IDE for test & programming development & debug

Develop Test Projects

Huge test library of JTAG and non-JTAG devices
Powerful XJEase scripting
Automated connection test
Stuck-at faults
Pull resistor faults
Open circuit faults
Test coverage reports
Design rules checker

All modules Included

XJRunner Run-time manufacturing test & programming environment

Execute Tests

JTAG chain debugger
Layout viewer
Schematic viewer
Log files
Fault dictionaries

XJAnalyser Real-time graphical board debug

Point-and-click pin control – no code required
Waveform viewer

XJFlash Industry-leading fast flash programmer

Uses FPGA on target board
30MB/s+ programming speed
SPI, MRAM and more
Simple integration with test projects

Optional

Network Licensing

Quantity:

XJLink-PF Series

Model

Hardware features

±30 V Voltage Protection
1 JTAG Controller
8 TAPs
4 TAPs
40 GPIO on Pins
20 GPIO on Pins
4 Voltage Banks
2 Voltage Banks
40 Dedicated GND pins
20 Dedicated GND pins
USB Connection
Up to 166 MHz TCK Frequencies
Configurable Voltage
Frequency Measurements
Voltage Measurements
Automatic Signal Skew Control
— Button to Start Tests
Visual Indication of Test Status
Mounting Options Available

Quantity:

XJQuad

Hardware features

±5 V Voltage Protection
4 JTAG Controllers
4 TAPs per JTAG Controller
18 GPIO on Pins per Controller
2 Voltage Banks per Controller
2 Dedicated GND pins per Controller
USB Connection
Up to 166 MHz TCK frequencies
Configurable Voltage
Frequency Measurements
Voltage Measurements
Automatic Signal Skew Control
Button to Start Tests
Visual Indication of Test Status

Quantity:

XJLink2 Series

Model

Hardware features

+5 V Voltage Protection
1 JTAG Controller
4 TAPs
18 GPIO on Pins
2 Voltage Banks
2 Dedicated GND pins
USB Connection
PXI Connection
SPEA – 3030 Connection
Keysight – i3070 Connection
Up to 166 MHz TCK Frequencies
Configurable Voltage
Frequency Measurements
Voltage Measurements
Automatic Signal Skew Control
Button to Start Tests
— Button to Start Tests
— Button to Start Tests
— Button to Start Tests
Visual Indication of Test Status
Visual Indication of Test Status
— Visual Indication of Test Status
— Visual Indication of Test Status

Quantity:

Accessory – Additional I/O

XJTAG hardware accessory - XJIO test extension board

XJIO Board + RS232 / UART

Expansion unit to improve the test coverage of your DUT. 208 I/O, RS232/UART, 8 A/D, 8 D/A, buttons, LEDs

Quantity:

XJIO Board without RS232

Expansion unit to improve the test coverage of your DUT. 208 I/O, 8 A/D, 8 D/A, buttons, LEDs.

Quantity:

XJComms

An add-on to the XJIO Boards offering a test solution for common automotive interface signals (CAN, RS-485/RS-422, FlexRay, LIN).

Quantity:

Accessory – Connection & Protection

XJXDP

Simply connect your XJTAG system to an Intel XDP debug header. Overcome the problems of interfacing to this low voltage, low impedance interface.

Quantity:

XJExtender, Controller+Target Pair

XJTAG’s recommended solution to overcome signal integrity issues when connecting a JTAG controller to a DUT up to 10 m away

Quantity:

XJTAG hardware accessory - XJExtender Controller board

XJExtender, Controller Unit

Additional Controller unit for use with XJExtender setups.

Quantity:

XJTAG hardware accessory - XJExtender Target board

XJExtender, Target unit

Additional Target unit for use with XJExtender setups.

Quantity:

XJIsolator

XJIsolator provides galvanic isolation between a DUT and a JTAG controller. Can be easily mounted inside a test fixture.

Quantity:

Surge Protection Board

Surge Protection Board Provides safeguards against excessive inrush current, over-current and overvoltage for the Device Under Test (DUT).

Quantity:

ICT Relay Board

Allows both a test controller and another piece of test/programming equipment access to the TAP control signals on a DUT, while ensuring the DUT is fully isolated.

Quantity:

Accessory – XJAccelerator

XJAccelerator, SODIMM

A multipurpose FPGA module, in SODIMM form factor, to accelerate programming functions and extend test coverage as part of a test fixture.

Quantity:

XJAccelerator v2

Multipurpose unit that can be integrated with your XJTAG system to facilitate and accelerate programming functions as well as extending test coverage on a DUT.

Quantity:

XJAccelerator Active Protector optional board

XJAccelerator v2 Active Protector

Additional optional protection for the XJAccelerator v2 board against potentially damaging voltages.

Quantity:

Accessory – Adapters

0.1” to 1.27 mm Adaptor

20-way 0.1” connector to 20-way 1.27 mm connector.

Product code: XJTAG-XJA-0060

Quantity:

0.1” to 2 mm Adaptor

20-way 0.1” connector to 20-way 2 mm connector.

Product code: XJTAG-XJA-0050

Quantity:

2x 10-way 0.1” Adaptor

20-way 0.1” connector into 2 x 10-way 0.1” connectors.

Product code: XJTAG-XJA-0100

Quantity:

2x 10-way 2 mm Adaptor

20-way 0.1” connector into 2 x 10-way 0.1” connectors.

Product code: XJTAG-XJA-0010

Quantity:

Coresight 10 Adapter

20-way 0.1” connector to a standard Coresight 10 10-way 1.27mm connector.

Product code: XJTAG-XJA-0015

Quantity:

Coresight 20 Adapter

20-way 0.1” connector to a standard Coresight 20 20-way 1.27mm connector.

Product code: XJTAG-XJA-0016

Quantity:

Signal Breakout Board

Allows oscilloscope or test meter access to signals when connecting controller to DUT.

Product code: XJTAG-XJA-0080

Quantity:

Splitter, Signal Integrity Board, Elbow

20-way 0.1” connector into 2 x 20-way 0.1” connectors. Improves signal integrity by putting a ‘hard ground’ connection between each active signal.

Product code: XJTAG-XJA-0030

Quantity:

Splitter, Signal Integrity Board, SFF

20-way 0.1” connector into 2 x 20-way 0.1” connectors. ‘Hard ground’ connections between active signals. Small Form Factor. Fits XJQuad.

Product code: XJTAG-XJA-0031

Quantity:

Splitter, Signal Integrity Board, PXI

20-way 0.1” connector into 2 x 20-way 0.1” connectors. Improves signal integrity by putting a ‘hard ground’ connection between each active signal.

Product code: XJTAG-XJA-0032

Quantity:

Splitter, Signal Integrity Board, Standard

20-way 0.1” connector into 2 x 20-way 0.1” connectors. Improves signal integrity by putting a ‘hard ground’ connection between each active signal.

Product code: XJTAG-XJA-0033

Quantity:

Termination & Protection Board

Provides series termination for increased speed, reliability and higher transient protection.

Product code: XJTAG-XJA-0021

Quantity:

Xilinx Adaptor

20-way 0.1” connector to a standard Xilinx 14-way 2 mm connector.

Product code: XJTAG-XJA-0040

Quantity:

Accessory – Other

XJLink-PF40 Mounting Kit

SKU: FXK-0001

Quantity:

XJLink-PF20 Mounting Kit

SKU: FXK-0002

Quantity:

XJTAG wishlist

Send us your list of products of interest by filling out the following form. Fields marked with an asterisk (*) are required.

* indicates required fields

Company

This field is for validation purposes and should be left unchanged.

Given name*

Family name*

Company email*

Company website*

Job title*

Location*

State*

I would like to*

Request a quote

Arrange a demo

Apply for a free trial

Message

This field is hidden when viewing the form

Desired products

This field is hidden when viewing the form

xjtag_source