The 2 to 3 hour sessions are designed to provide design, development, test, and production engineers with a practical hands-on introduction to JTAG boundary scan, using real hardware. You will have access to a full XJTAG development system to give you the experience of actively developing and running boundary scan tests.
The webinar will be run by an experienced engineer (all you need is a web browser). No prior knowledge of JTAG is required.
A recording of the webinar will be made available afterwards, as will further hardware access time should you wish to review the webinar content.
Introduction to JTAG –
Concepts, Tools & Design for Test (DFT)
Learn the basics of boundary scan and how you can use it right across the product lifecycle to improve designs, reduce respins and enhance test coverage, fault diagnosis and production yields on complex BGA-populated circuits. The webinar outlines the following:
- Overview of the IEEE 1149.x standards
- How to communicate with the JTAG chain
- Tools to interact with JTAG devices, such as FPGAs or Processors
- Introduction to board testing using the JTAG chain
- How to describe a circuit in order to enable JTAG testing
- Fault finding abilities of a JTAG connection test
- How to test non-JTAG elements of a board design using boundary scan
Webinars are free of charge by registration.
To book your place or register your interest in a location, please fill in the form. (Places subject to availability and at the discretion of XJTAG.)
Very much enjoyed the workshop. If only all the free one-day workshops could be as useful, relevant and information-packed as XJTAG’s! Having the tools and hardware to play with was invaluable.
Peter Sarginson, Digital Design Engineer, Broadcast Sports International
Worldwide JTAG Training
We are running webinars in a number of countries depending on demand. If you are interested in attending a webinar in your area, please fill out the form above and indicate your proposed location in the ‘Comments’ field.